I Built the Ambitious X Desk In Two Hard Days

Fine furniture to last generations, maybe not

When my wife and I changed spaces in the house, I gave her my desk. That left me without a place for my computer. I decided I could make one.

I’ve got a compound miter saw, a drill with a Kreg jig, and a tape measure. Lowes provided the lumber.

The biggest feature of the desk is the dramatic cross braces used on the left and right legs of the desk. Because I have a miter saw, I knew I could cut these pieces easily. I even made a modification to the design to support a narrower support in back. The back braces now angle 22.5 degrees instead of 45.

I made a decision on the top; instead of screwing in from the bottom, or countersinking screws in the top, I would use bolts. I thought flat bronze crowns for the bolts would make nice accents. Bolts would make taking the desk apart possible too.

The challenge with bolts was the top layer of the legs. Two 2×4 and two more 1 inch boards meant about 4 1/2 inches to drill through and run a bolt through. I chose a trick. I embedded a T nut in the bottom side of the top leg 2×4. The nut is buried in the leg and won’t get lost. The bronze bolts run through holes in the top and holes in the leg and into the nut. Perfect.

I gave the desk a light sanding before applying stain and wax. I should have bought an electric sander and given the whole thing a finer finish.

About two weeks later the wax finish has just about dried. I could clear it off and give it a good polishing. I’ve been enjoying it for more than a week now.

Related posts:

Past few months have seen a spike in incidents and causalities in the energy sector, which was otherwise going relatively with a downward trend of incident rates across all the major oil companies…

With US house prices drastically on the rise in 2018, the term real estate appreciation is finding its way into every real estate investing discussion imaginable.Real estate appreciation is…

A forma mais segura de conseguir bons retornos investindo em ações é comprar papéis de empresas bem geridas, que apresentem lucros sólidos e crescentes, e não ter pressa de vendê-las. O investidor…